Basic multi-split
A practical solution for two or three rooms: one outdoor unit with a separate indoor unit in each room. Compare the basic combinations below, each with the smallest MSZ-HR indoor units.
On a small screen, swipe the table horizontally.
| Your system | 2 rooms · MXZ-2HA40 | 3 rooms · MXZ-3HA50 |
|---|---|---|
| Starting price | € 3,630.00Including installation and VAT | € 4,510.00Including installation and VAT |
| Indoor units included | 2 × MSZ-HR25 · each 2.5 kW | 3 × MSZ-HR25 · each 2.5 kW |
| Outdoor unit connections | 2 | 3 |
| Outdoor unit cooling capacity | 1.10–4.30 kW | 2.90–6.50 kW |
| Outdoor unit heating capacity | 4.30 kW | 2.60–7.50 kW |
| Nominal electrical input · cooling | 1.05 kW | 1.26 kW |
| Nominal electrical input · heating | 0.91 kW | 1.30 kW |
| Maximum electrical input power | 2.40 kW | 3.60 kW |
| Energy label cooling / heating | A++ / A+ | A++ / A+ |
| SEER / SCOP | 8.12 / 4.30 | 7.26 / 4.02 |
| Outdoor unit dimensions · H × W × D | 550 × 800 × 285 mm | 710 × 840 × 330 mm |
What does electrical consumption mean?
Electrical input power describes the electricity used by the system, measured in kW. Cooling and heating capacity describe how much heat the system transfers. These are different values. An average electrical input of 1 kW for one hour uses 1 kWh of electricity.
The electrical power values above are manufacturer data for the outdoor unit under reference conditions. Actual consumption depends on the selected combination, outdoor temperature, insulation, settings and number of active indoor units.
Is a multi-split right for your home?
You control the temperature in each room. Connected indoor units operate in the same mode at the same time: cooling or heating. The available capacity is shared between active rooms. We check which combination suits your home and specify the installation details in your quotation.